Kodak 645 - Manual (Page 53)

The Basics
53 Contents Back Next Index
Disconnecting the DCS 645 from the
Camera Body
1 Place the camera on a table or other flat
surface.
2 If they are connected, unplug the video cable
(page 124) and the IEEE 1394 cable (page
79) . Turn off and disconnect all flash and
strobe systems.
3 Turn off the camera body.
4 If the DCS 645 is being powered by battery,
remove the battery
(page 59) .
If the DCS 645 is being powered by AC
adapter, disconnect the AC adapter.
5 Rotate the DCS 645 Release button to the left
and press, then pivot the top of the camera
body away from the DCS 645.
6 Carefully remove the DCS 645 from the
camera body.
☛ Do not store the DCS 645 with an attached
battery or with the AC adapter plugged in.
DCS 645
Release
button