Kodak 645 - Manual (Page 78)

Using the Camera Connected to a Computer
78 Contents Back Next Index
Using the Camera Connected to a Computer Getting Started
To start using your camera connected to a
computer, do the following.
☛ It is not necessary to turn off the computer.
1 Assemble the camera (page 50) .
2 Install the included software, as needed
(page 27) .
3 Connect the camera to the computer and
power supply
(page 79) .
4 Turn on the computer, if it isn’t already.
5 Start DCS Capture Studio or DCS Camera
Manager.
If DCS Capture Studio is running, images are
saved to the computer. If DCS Camera
Manager is running, images can be saved to
the computer or to a CF Card.
6 Capture images.
7 Review and edit the images, as needed, in
DCS Capture Studio, DCS Photo Desk, or
ADOBE PHOTOSHOP with the DCR File
Format Module.
8 Save the images to the computer’s hard drive
in the desired format.
Before You Begin