Kyocera Lingo M1000 User Manual

Page 72

Advertising
background image

64

Network

Roaming alert

Use this setting if you want the phone to alert you
when roaming outside of your home service area.
Select

Menu

>

Settings

>

Network

>

Roam/Svc Alert

and one of the following:

Disabled

turns the roaming alert off.

When no svc

alerts you with three tones

decreasing in pitch when service is lost and
three tones increasing in pitch when service is
acquired again.

On roam change

alerts you with two

decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.

On any change

alerts you with three

increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.

Roam Option

You can restrict your phone from making a call
when roaming. Select

Menu

>

Settings

>

Network

>

Roam Option

>

Automatic

(to allow

roaming calls) or

No roaming

(to disallow

roaming calls).

Set Phone Line

Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number. Select

Menu

>

Settings

>

Network

>

Set Phone Line

and one

of the two lines.

When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, still takes messages. All contacts and
settings are shared for both lines.
Note: You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection.

Control network roaming

Depending on services available from your service
provider, you may set the phone to either digital
or analog mode. This is useful if you are in an
area that borders on digital service and the
automatic feature is causing the phone to keep
switching between modes.
Select

Menu

>

Settings

>

Network

>

Digital

and

one of the following:

Automatic

automatically switches the phone

between digital and analog.

Digital only

sets the phone to work in digital

mode only.

Location

Use this setting to share your location information
with network services other than emergency
services (for example, 911, 111, 999 and 000) in
markets where service has been implemented.

82-G1934-1EN.book Page 64 Sunday, October 14, 2007 6:19 PM

Advertising