Kyocera Lingo M1000 - Manual (Page 76)

68 Using Bluetooth
Note: When pairing is initiated from another
Bluetooth wireless technology device, you
are prompted to accept or reject the pairing.
6. If necessary, enter the password provided in
the Bluetooth wireless technology device’s
user guide and select
OK .
Your phone waits for the device’s response.
With the password accepted, the device
shows in
My Devices .
Using Bluetooth
Before you can use the Bluetooth wireless
technology functions of your phone, you must get
your phone ready to communicate with a device.
This is called “connecting.”
Connecting to a device
To connect your phone to an audio Bluetooth
wireless technology device:
1.
Select Menu > Bluetooth > My Devices .
2. At the device list, highlight a device and
select
Connect .
A notification appears confirming the connection.
You can now use the device with your phone.
Disconnecting from a device
To disconnect your phone from an audio
Bluetooth wireless technology device:
1.
Select Menu > Bluetooth > My Devices .
2. At the device list, highlight a device and
select
Disconnect .
Device list options
You can change or review the information about
each device you paired with your phone.
1.
Select Menu > Bluetooth > My Devices .
2. Highlight your desired device.
3. Select Options and one of the following:
– Rename to rename the device.
– Delete to remove the device from your
phone if you are no longer going to use
it.
– Services to view a description of the
device (such as Headset, Handsfree,
Object Push, and Serial Port).
Bluetooth settings
You can set how your phone interacts with
Bluetooth wireless technology devices. Select
Menu > Bluetooth > Settings and one of
the following:
•
My Name changes the name of your phone for
other devices it is paired with to identify.
• Visible Duration sets the time your phone
remains visible to other devices.
• Services shows the list of the Bluetooth
wireless technology service protocol
supported by your phone.
82-G1934-1EN.book Page 68 Sunday, October 14, 2007 6:19 PM