KTI Networks Modular Media Converter Center System KC-1300 - Manual (Page 20)

-20-
2.2.4 Media Converter Slots
The system chassis provides sixteen slots for installing optional slide-in
MCs.
A media converter can be inserted into an available slot or removed from
a slot anytime even when system unit is powered on. This hot-plug
design keeps all exiting connections on the other slots running with no
influence.
To insert an MC into a slot, the steps are:
1. Install a bracket, which is provided in the rack chassis package onto
the MC unit as shown below:
2. Remove slot cover first and insert the MC into slot slowly until it is
seated in slot properly.
3. Screw the bracket onto system chassis securely before making any
cable connection.