KTI Networks Modular Media Converter Center System KC-1300 - Manual (Page 26)

-26-
2. Connect one end to the console port and connect the other end to
the PC COM port.
3. Configure your PC COM port setting to match the RS-232 settings of
the console port and start your terminal software.
Factory default settings of the Console port
Baud rate : 38400, N, 8, 1, 0
Flow control : disabled
4. Turn the system power on.
5. Press <Enter> key several times in your terminal software until a
login prompt comes up. It means the connection is proper.
The console port does not support modem connection.
Refer to Chapter 4 for more information about Console management.