Kyocera KR1 - Manual (Page 13)

Using the Configuration Menu 9
Basic > Wireless (Security–No Encryption)
Wireless Mode- Enabled is the default. Selecting this option will allow you to set your Wireless Access Point (WAP)
settings. Selecting Disabled, will grey-out all Security radio buttons (please see “Security” below).
SSID- Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The
SSID's factory default setting is KR1. The SSID can be easily changed to establish a new wireless network.
(Note: SSID names may contain up to 32 ASCII characters).
Channel- Auto Select is the default . Devices on the network must share the same channel.
(Note: Wireless adapters automatically scan and match the wireless settings. You may also select the
channel you wish to use).
Security- You may select from three levels of encryption to secure your wireless network:
No Encryption, WEP, or WPA-PSK.
Security- No Encryption is the default (as shown in the screen above).