Disc search, Track / disc repeat, Track scan – Kenwood KRC-609 User Manual

Page 17

Advertising
background image

Successively play the beginning of each track on a disc until
you find the track that you want to listen to.

Starting the Track Scan:

Press the SCAN button. “Scan ON” is displayed and the first
10 seconds of each track will be played, in order.
The track number currently being heard blinks in the display.

Stopping to Listen to the Track Being Scanned:

Press the SCAN button again to stop the scan and keep on
listening to a track normally.

• The track scan function is canceled when you eject the disc.
• The track scan function only scans each track on a disc once.

NOTE

Track Scan

Repeat play is canceled when you eject the disc.

Repeat playing the track or the disc currently being listened to.

Turning Repeat Play On/Off:

Press the REP button to switch repeat track/disc play on and
off as follows:

“T-Repeat ON” is displayed and the track number blinks in the
display when track repeat is on.
“D-Repeat ON” is displayed and the disc number blinks in the
display when disc repeat is on.

NOTE

Track Repeat ON

Disc Repeat ON

Repeat OFF

Track / Disc Repeat

Search forward or backward through the discs in a disc
changer.

Making a Reverse Disc Search:

Press the AM button to display the desired disc number.
Each time the button is pressed, the displayed disc number
decreases by one.
Play starts at the beginning of the displayed disc.

Making a Forward Disc Search:

Press the FM button to display the desired disc number.
Each time the button is pressed, the displayed disc number
increases by one.
Play starts at the beginning of the displayed disc.

“Load” is displayed when discs are being exchanged on the disc
changer.

NOTE

Disc Search

— 17 —

KRC-609_U.S 00.12.26 3:29 PM Page 17

Advertising
This manual is related to the following products: