Switching modes, Loudness, Audio control setting – Kenwood KRC-609 User Manual

Page 6: General features

Advertising
background image

Adjust various parameters of sound quality.

Press the AUD button for at least one second to enter the
control mode.

Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.

Bass

Treble

Middle

Balance

Fader

Volume Offset

2

1

Audio Control Setting

This function amplifies low and high tones when the volume is
turned down.
The LOUD indicator lights up when the loudness function is
on.

Turning Loudness On/Off:

Press the LOUD button for at least one second to switch the
loudness on and off.

Loudness

Pressing

4 or ¢ button during this mode allows you to select

"AUX" , "TV" , "VCP" , "GAME" or "PORTABLE" in the AUX mode.
The AUX-name selection mode can be exited by pressing the
DISP button or doing nothing for 10 seconds.

Switching Modes:

Each time you press the SRC (source) button, the mode
switches as follows:

Selecting standby mode:

Press the SRC button repeatedly and switch to "ALL OFF" .
When "ALL OFF" is displayed, the standby mode is activated.
The standby mode turns all functions off while leaving the
power to the unit on. Use this mode when you want to have
the display illuminated but don't want to listen to anything.

• The mode switches to the next mode from any mode which

cannot be used.

• The external disc control mode will differ depending on the unit

that is connected.

• To enable the selection of External disc control mode 2/AUX

mode, you should connect optional switching adapter KCA-
S210A (which allows you to select both External disc control
mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-
CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or
switching adapter CA-C1AX (which allows you to select AUX
mode only).
During the AUX mode, "AUX" (or AUX-name display) will show
in the display. When the CA-C1AX is being used, the AUX Mode
will replace the External Disc Control Mode.

Selecting AUX-name display

Pressing the DISP button for at least two seconds during the
AUX mode, AUX-name display is blinked for AUX-name selection
mode.

NOTE

NOTE

Tuner mode

Tape mode

External disc control mode 1

External disc control mode 2 / AUX mode

Standby mode

Switching Modes

General features

— 6 —

English

KRC-609_U.S 00.12.26 3:29 PM Page 6

Advertising
This manual is related to the following products: