Kohler Bath Whirlpool with Neckjets K-865 - Manual (Page 12)

Troubleshooting Procedures (cont.)
Troubleshooting the Whirlpool System
Symptoms
Probable Causes Recommended Action
17. Water flows from neckjets,
but neckjets do not pulse.
A. Wiring harness from
neckjet pulse canister to
control is loose,
disconnected or damaged.
A. Check wiring for proper connections.
Replace wiring harness if necessary.
Refer to installer/dealer.
B. Pulse canister does not
work.
B. Replace pulse canister. Refer to
installer/dealer.
C. Control is not working. C. Replace control. Refer to
installer/dealer.
1019451-5-C 12 Kohler Co.