KVH Industries antenna system - Manual (Page 100)

Single TracVision Mobile Receiver
Audio/Video Connections
• To connect the receiver to the TV’s video input,
you can choose either of the following options:
Option 1 - RCA-type jack
Option 2 - S-Video jack
• To connect the receiver to the TV’s audio input,
you can choose either of the following options:
Option 1 - RCA-type jacks
Option 2 - Digital audio jack
• Standard audio/video cables with RCA-type
connectors are included with the receiver.
• If the TV has only a coaxial input, you will need
to use an RF modulator to convert the RCA-type
input to a coaxial output. (use Radio Shack model
15-2526 or equivalent)
Power
• The receiver requires a 10-16 volts DC (VDC)
power input supporting 60 watts.
• If vehicle power fluctuates or is noisy, KVH
recommends that you use an AC/DC power
supply (KVH P/N 72-0206-01) to connect power
to the receiver.
RF Converter
• The RF converter should be placed at least 3 feet
away from the receiver. If it is too close to the
receiver, the remote control might not operate
properly.
• Avoid placing the RF converter behind a metal
surface or in an area surrounded by metal.
54-0376
A.5
System Wiring Diagrams