KVH Industries antenna system - Manual (Page 108)

One TracVision Mobile Receiver and Two
Standard Home Receivers
Components Required
• Splitter Kit, KVH P/N 72-0177
• Destacker, Dual-output, KVH P/N 19-0410
• The special splitter included in the Splitter Kit
permits communications between the antenna
and the primary receiver. A standard off-the-
shelf splitter will not work.
Why Do I Need a Dual-output Destacker?
• The output of the TracVision antenna is a special
stacked signal, which the TracVision mobile
receiver is configured to decode. Since all
standard home receivers are configured to decode
unstacked signals, a dual-output destacker is
needed to convert the antenna’s stacked signal
into two unstacked signals.
Compatible DIRECTV Receiver Models
• The TracVision antenna is compatible with all
new DIRECTV-branded receiver models
manufactured today. Older, non-DIRECTV-
branded receiver models are not supported.
Local Channels
• Only the primary mobile receiver can receive
local channels (within the DMA used on your
account).
54-0376
A.13
System Wiring Diagrams