Kodak 6B6254 User Manual
Page 22
Using the IPS Software with the KODAK PROFESSIONAL LED II Printers
18
December 2000
The Enqueue dialog box appears.
NOTE: The Enqueue and the Source Directory Preferences dialog boxes look
almost identical, but they affect different image files. The information
in each dialog is independent of the other.
2. Type
the
Image File path and name or click Browse to select the TIFF Image
File to be printed.
3. Enter the number of copies of the image to print. Valid numbers are from 1
through 9999. The default value is 1.
4. Select
the
Printer Resolution:
•
The default value is 250 ppi; when you select 250 ppi, the image is printed
pixel for pixel.
•
When you select 125 ppi, the printer’s hardware pixel replication capability
is enabled.
5. Select
the
Print Production:
•
To print immediately, click the button next to Immediate.
•
To print later, click the button next to Deferred.
6. Select
the
Roll to Roll Options:
•
If the image is the end of an order, click the box next to Order Punch.
•
If you want a punch .25 in. inside the image area to mark a gutter for host
image information, click the box next to ID Punch.
7. To center the image on the paper, leave the Center image box checked. If
you do not want to center the image, click to “uncheck” the box.
To ensure that the complete image file is exposed on the paper, Kodak
recommends that you always check “Center image.”