Kodak 6B6254 - Manual (Page 7)

Using the IPS Software with the KODAK PROFESSIONAL LED II Printers
December 2000 3
Installing the IPS Application
Before you perform the installation, make certain you are familiar with the
Windows NT operating system.
Hardware Requirements
The following is the minimum hardware required for the IPS application:
• 64 MB Main System Memory
• 100 MHz PENTIUM Processor
• VGA Monitor (640 x 480 spatial resolution)
Software Requirements
The following must be installed on your computer:
• Windows NT Workstation 4.0
• An ASPI-compliant SCSI interface driver (recommended: Adaptec 2940 SCSI
card)
Installing the Software
Downloading the Installation Application
1. Place the IPS application CD in your CD-ROM drive.
2. When the Internet Browser appears, select LED Printer.
3. Scroll to Image Print Server and click KPROImagePrintServer.
4. If a dialog box appears asking if you want to “save this program to disk”
accept the dialog box (do not launch the program from the browser).
The Save As... dialog box appears.
5. Either accept the path shown or click Browse to select another path for the
KProImagePrintServer.exe file.
6. Click Save.