Removing images from the print queue, Removing the top image from the queue – Kodak 6B6254 User Manual
Page 23
Using the IPS Software with the KODAK PROFESSIONAL LED II Printers
December 2000
19
8. If the LED Printer was calibrated using Density, you may apply Tone Scale
Correction with the g22_fullrange.txt file in the LUTs folder supplied with the
IPS application.
To apply tone scale correction:
a. Type the path and file name of the Correction File or click Browse to
select the Correction File to be applied to each image.
b. Click the box next to Apply to apply the designated Correction File to each
image.
9. When the dialog box is complete, click OK to close the dialog box and save
the specified values (or click Cancel to close the dialog box without saving the
values).
NOTES: You cannot enqueue a file that is in process. Wait until the file is
completely processed before you access the file again.
Images placed in the queue by using the Enqueue function are not
removed from their original directory after they are sent to the printer.
Removing Images from the Print Queue
Removing the Top Image from the Queue
1.
Click the Dequeue icon or select File>Dequeue.