Key Digital KD-CDA3 - Manual (Page 12)

KD-CDA3 Operating Instructions
Page 19 of 29
KD-CDA3 Operating Instructions
Page 18 of 29
If you need to expand the distribution capability of your KD-CDA3 HDTV Distribution
Amplifier, simply use one of the Outputs of the unit that may now be going to one of
your displays, and connect that output to the input of another Key Digital
® Analog
Distribution Amplifier. The total distribution capability is the sum of the total Outputs
of all units, minus one. For example, using the KD-CDA3 3-output Distribution
Amplifier, cascaded with the Key Digital
® KD-CDA6 6-output Distribution Amplifier,
you will need to use one of the three Outputs of the KD-CDA3 to drive the Input of
the Input of the KD-CDA6. Hence, you will be able to drive your Source to up to 8
displays (3 - 1 + 6 = 8).
Remember, you MUST only use the Power Supplies intended for each product, as
provided with each Unit. Do not attempt to share or swap Power Supplies.
Expansion with two KD-CDA3 HDTV Distribution Amplifiers
allows you to drive up to 3 – 1 + 3 = 5 displays
YPbPr Component Video
Audio
Mounting Information
■ A convenient mounting bracket is provided
■ The top and bottom of the unit are solid metal (no vents)
■ The unit may be oriented horizontally, or mounted vertically on a wall
- Use #8 or M4 screws to hang the unit (keyhole slots are provided on the base of
the unit)
Caution: If installing the KD-CDA3 unit or Mounting Bracket
into sheet-rock or hollow walls, provide proper screw sup-
port with bolts or sheet-rock anchors.
Expansion
You may find that as your Video and Audio system grows, you may need to distribute
your Source to more than three displays. The full line of Key Digital
® Analog
Distribution Amplifiers is truly expandable and cascadeable. Not only is your system
future-proof, but also you will be able to enjoy beautiful, crystal-clear images, because
the signal will not be degraded in any way when you properly cascade Key Digital
®
products.
KDCDA3_OperInstructions.qxd 1/4/06 12:58 PM Page 18