Key Digital KD-CDA3 - Manual (Page 15)

KD-CDA3 Operating Instructions
Page 25 of 29
KD-CDA3 Operating Instructions
Page 24 of 29
■ RCA connectors for all Video and Audio inputs and outputs
■ Future-proof and expandable:
➾ Can be cascaded to KD-CDA3 or other Key Digital ® Distribution Amplifiers
to drive as many outputs as desired from one source
■ It is possible to substitute Composite Video (CVBS) or S-Video in place of the
Component Video signals, using appropriate adapter cables
Compatible Video Signals
■ Compatible with all standard analog video signal formats that use 50Hz or 60Hz
refresh rates, including:
➾ 1080p, 1080i, 720p, 576p, 576i, 540p, 480p, 480i
Video
■ Component Video (YPbPr) or RGBHV Video
➾ RGBHV installations preclude Audio distribution with your KD-CDA3 unit
■ Three RCA-type color-coded input connectors (YPbPr, RGB)
■ 1V p-p @ 75 ohms, terminated
■ 300 MHz video bandwidth
■ Sync:
➾ Component Video (YPbPr) sync on "Y" input
➾ The analog audio input/output connectors also serve as the Horizontal
and Vertical sync for RGBHV signals
■ It is possible to substitute Composite Video (CVBS) or S-Video in place of the
Component Video signals, using appropriate adapter cables
➾ Supports up to seven (7) CVBS Outputs or three (3) S-Video Outputs
TECHNICAL SPECIFICATIONS
Model: KD-CDA3 Operating Instructions
HDTV Distribution Amplifier
3-Channel Component Video & Audio Distribution Amplifier
Key Features
■ Enables 3-channel signal distribution from any HDTV or SDTV Component Video
(YPbPr) or RGBHV Video source including 1080p, to HDTV-ready displays
➾ Also distributes S-Video
➾ Also distributes a Composite Video (CVBS) signal to up to seven (7)
Composite Video displays
■ Distributes Video and analog stereo or digital (PCM) Audio
➾ RGBHV installations preclude Audio distribution with your KD-CDA3 unit
■ No controls
■ Crystal-clear images
Inputs and Outputs
■ One (1) Audio/Video Input
■ Three (3) Audio/Video Outputs
■ Each Input and Output array is comprised of three (3) component YPbPr analog
Video connectors, and two (2) analog stereo Left and Right Audio connectors:
➾ Instead of analog Audio Input/Output,
the two (2) connectors can be used for:
– The Horizontal (H) and Vertical (V) sync for RGBHV signals, or
– Two (2) PCM digital Audio signals
KDCDA3_OperInstructions.qxd 1/4/06 12:58 PM Page 24