Kitchen Labs ProMediaTM - Manual (Page 3)

I M P O RTANT SAFETY INSTRUCTIONS
CAUTION:
RISK OF ELECTRIC SHOCK!
DO NOT OPEN!
CAUTION! To reduce the risk of electric shock and fire, do not remove the
cover or back plate of the device enclosure. There are no user serviceable
parts inside. Refer servicing to a Klipsch authorized service center.
CAUTION! The international symbol of a lightning bolt inside a triangle is
intended to alert the user to uninsulated "dangerous voltage" within the
device enclosure. The international symbol of an exclamation point inside
a triangle is intended to alert the user to the presence of important
operating, maintenance and servicing information in the manual
accompanying the device.
WARNING! To reduce the risk of fire or electrical shock, do not expose this
equipment to rain or moisture.
1. Read Instructions – All safety and operating instructions should be read before
operating the device.
2. Retain Instructions – The safety and operating instructions should be retained for
future reference.
3. Heed Warnings – All warnings on the device and in the operating instructions
should be adhered to.
4. Follow instructions – All operating and safety instructions should be followed.
5. Attachments – Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
6. Water and Moisture – Do not use this product near water (for example, near a
bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a
swimming pool; and the like).
7. Ventilation – Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from overheating, and
these openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have been
adhered to.
8. Heat – This product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers) that
produce heat.
9. Power Sources – This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power
supply in your home, consult with your product dealer or the local power
company. For products intended to operate from battery power, or other sources,
refer to the operating instructions.
10. Grounding – This product is equipped with a three-wire grounding-type plug, a
plug having a third (grounding) pin. This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the grounding-type plug.
11. Power-Cord Protection – Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
12. Overloading – Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electrical shock.
13. Lightning and Periods of Non-Use – For added protection for this product during
a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to lightning and powerline surges.
14. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
15. Object and Liquid Entry – Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill liquid of any kind on the
product.
16.Damage Requiring Service – Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an
improper adjustment of other controls may result in damage and often will
require extensive work by a qualified technician to restore the product to its
normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance – this indicates a
need for service.
17. Replacement parts – When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original parts. Unauthorized substitutions may result
in fire, electric shock, or other hazards.
18. Safety Check – Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the product is in
proper operating condition.
19. Servicing – Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
If this unit is purchased outside of the U.S., please contact your local dealer or
distributor for service center information. If purchased inside the U.S. and dealer
service is not available, contact Klipsch Customer Service for a return authorization
(RA) number before shipping. For further service information, contact:
KLIPSCH CUSTOMER SERVICE
1-888-554-5665
137 COUNTYRD 278
HOPE, AR USA71801
WE WANTYOUR NEW SPEAKER SYSTEM TO LOOK AS GOOD AS ITDID
LEAVING THE FACTORY. PLEASE CHECK PROMPTLY FOR TRANSIT DAMAGE.
Carefully unpack your new speaker system and check the components against the
packing list. In extreme circumstances, items may have become damaged in transit. If
any damage is discovered, notify the delivery service and/or dealer where the system
was purchased. Make a request for inspection, and follow the instructions for
evaluation. Be sure to keep the product with its original shipping carton. Klipsch also
recommends that you save your packing material to aid in future transportation.