Kenwood KDC-5020 - Manual (Page 26)

Menu system
— 26 —
English
Function of the KDC-MPV7020/KDC-6020
Setting the Display type.
Display Setting
"DisplayD" Demonstration.
"DisplayA" Circle Display is play time.
Switching Display Type
Function of the KDC-5020/KDC-5020R
Setting the graphic part display ON/OFF.
Display Setting
"GRPH ON" The graphic part is displayed.
"GRPH OFF" The graphic part isn't displayed.
Switching Graphic Display
Function of the KDC-MPV7020/KDC-6020/KDC-5020R
Selecting the button illumination color as green or red.
Display Setting
"KEY GRN" The illumination color is green.
"KEY RED" The illumination color is red.
Selectable Illumination
removed, warning potential thieves.
Display Setting
"DSI ON" LED flashes.
"DSI OFF" LED OFF.
A red indicator will blink on the unit after the faceplate is
DSI (Disabled System Indicator)
Function of the KDC-5020R
Synchronizing the RDS station time data and this unit's clock.
Display Setting
"SYNC ON" Synchronizes the time.
"SYNC OFF" Adjust the time manually.
It takes 3 to 4 minutes to synchronize the clock.
Synchronize Clock
This adjustment can be done when the <Synchronize Clock> (page
26) is set as OFF.
1 Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "CLK ADJ" display.
2 Enter Clock Adjust mode
Press the [
4] or [¢] button for at least 1 second.
The clock display blinks.
3 Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [
4] or [¢] button.
4 Exit Clock adjustment mode
Press the [MENU] button.
Manual Clock Adjustment