Kenwood KDC-5020 - Manual (Page 28)

Function of the KDC-MPV7020/KDC-6020/KDC-5020
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
CRSC (Clean Reception System Circuit)
<In FM reception>
Function of the KDC-MPV7020/KDC-6020/KDC-5020R
For the operation method refer to <Auto Memory Entry> (page
14/ 19).
Auto Memory Entry <In Tuner mode>
Function of the KDC-5020R
Sets the tuning mode.
Tuning mode Display Operation
Auto seek "AUTO 1" Automatic search for a station.
Preset station seek "AUTO 2" Search in order of the stations
in the Preset memory.
Manual "MANUAL" Normal manual tuning control.
Tuning Mode <In Tuner mode>
Function of the KDC-5020R
Only stations whose reception is good are searched for in auto
seek tuning.
Display Setting
"LO.S OFF" The local seek function is OFF.
"LO.S ON" The local seek function is ON.
Local Seek <In Tuner mode>
Function of the KDC-5020R
It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00M"
"NEWS 90M"
When "NEWS 00M" — "NEWS 90M" is set, the News Bulletin
Interrupt function is ON.
When it's ON, the "NEWS" indicator is ON.
When the news bulletin starts, "NEWS" is displayed, and it
switches to the news bulletin.
• If you choose the "20M" setting, further news bulletins will not be
received for 20 minutes once the first news bulletin is received.
• The news bulletin volume is the same level that was set for traffic
information (page 15).
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.
…
News Bulletin with Timeout Setting
Function of the KDC-MPV7020/KDC-6020
Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Display Setting
"SWPRE R" Rear preout.
"SWPRE NF" Non-fading preout.
Switching preout
Menu system
— 28 —
English