Kenwood KDC-5020 - Manual (Page 27)

— 27 —
Function of the KDC-MPV7020/KDC-6020
Dimming this unit's display automatically when the vehicle light
switch is turned ON.
Display Setting
"DIM ON" The display dims.
"DIM OFF" The display doesn't dim.
Dimmer
Function of the KDC-MPV7020/KDC-6020
Adjusting the display contrast.
Display and Setting
"CONT 0"
"CONT 5" (Original setting)
"CONT 10"
…
…
Contrast Adjustment
Blue fine adjustment
1 Press the [#3] button for at least 2 seconds.
2 Press the [
4] or [¢] button.
When the blue fine adjustment is completed, press the [#3]
button.
The set color memory
Press the [#5] button for at least 2 seconds.
When the setting in the memory is called up press the [#5]
button.
The blue fine adjustment setting cannot be stored in memory.
Function of the KDC-MPV7020
You can set the display to a desired color.
1 Select Illumination Color Setting Mode
Press the [FM] or [AM] button.
Select the "COL" display.
2 The color continues to change gradually
Continue pressing the [
4] or [¢] button.
Release your finger at the color you want.
Quick call up the preset color
Press the [#1] — [#4] button.
Button Color
[#1] Silky White
[#2] Red
[#3] Blue
[#4] Blue Green
Selecting the Color mode
Press the [#6] button.
Each time the button is pressed the Color mode switches as
shown below.
Display Color mode
"Scan" The color changes in sequence.
"SRC" The color changes according to the selected source.
"Time" The color changes every 6 hours.
Keeps the presently set color.
Illumination Color Setting
"DisplayB" Circle Display is clock.
"DisplayC" Silent display type.