Kathrein UFD 505 - Manual (Page 20)

On-screen displays On Screen Display
programme and by pressing the
-+
buttons you jump to the neighbouring page or
enter-in the channel number with the buttons on the remote control. Confirm your
programme selection by pressing the
O
button, press the
L
button to exit the
programme list and remain in the programme already set.
Selecting a radio programme by number entry
You can select a different radio programme during a current radio programme by
entering the programme location number. Use the number buttons
1
to
0
for
the purpose of entering the programme location number.
Example You wish to select the radio programme "DLR-Berlin". This programme is stored
under the programme location number 015. (The order of radio programmes is de-
fined in the programme memory and therefore only serves as an example here.)
To select this programme, press the numbers
1
and
5
one after the other. The
receiver waits for about 3 seconds for entry of the next number.
Follow the same procedure for all other programmes – i.e. also programmes with
three-digit programme location numbers. You do not have to enter leading zeros.
20