Kenwood KRF-V7010 - Manual (Page 7)

7
KRF-V7010/V6010/V5010 (En/T)
Preparation
Names and functions of parts
DISC SKIP
A/B +100
1 2 3 0
4 5 6 +10
7 8 9
VIDEO 1
PTY TA/NEWS DISPLAY
MD/TAPE TUNER CD PHONO
BASS BOOST
BAND
VIDEO2/MON. DVD/6CH INPUT DIRECT
SOURCE
TUNING P.CALL
POWER
REMOTE CONTROL UNIT
RC-R0307
AUTO
VOLUME UP
VOLUME DOWN
MULTI CONTROL
MUTE
SOUND
SETUP
MODE
LISTEN
UP DOWN
1
2
3
4
5
6
7
#
!
9
0
8
@
Remote control unit (RC-R0307)
2 key
If tape is selected as the input source, this
key functions as the play key for side B of
the cassette (the side facing away from the
front of the deck).
BAND ( 6 ) key &
If tuner is selected as the input source, this
key functions as the band selector key.
If CD is selected as the input source, this
key functions as the play/pause key.
If MD is selected as the input source, this
key functions as the play key.
DISC SKIP, A/B, +100 key
If CD is selected as the input source, this
key functions as the multi-CD player disc
skip key.
If TAPE is selected as the input source, this
key is used to switch between the two
decks (A and B) of a double cassette
deck.
AUTO key &
If tuner is selected as the input source, this
key functions as the AUTO key.
If CD or MD is selected as the input source,
this key functions as the stop key.
5 LISTEN MODE key £
Use to select the listening mode.
6 SOUND key ¢
Use to adjust the sound quality and ambi-
ence effects.
7 SETUP key #
Use to select the surround sound settings.
8 POWER key #
Use to switch the power ON/STANDBY
when the POWER is turned ON.
9 BASS BOOST key %
Use to select the maximum adjustment
setting for the low frequency range.
0 SOURCE DIRECT key ^
! MUTE key ^
Use to temporarily mute the sound.
@ MULTI CONTROL key
Used to make a variety of settings.
# VOLUME CONTROL key
1 RDS operation key
Use to receive RDS broadcasts.
2 Numeric keys
If CD or MD is selected as the input source,
these keys function as numeric keys. If
tuner is selected as the input source, these
keys are used to call up station presets.
3 Input selector keys %
Use to select the receiver’s input source.
4 Component operation keys
Use these keys to operate other compo-
nents with system control connections to
the receiver.
TUNING ( 1 ¡ ) keys &
If tuner is selected as the input source,
these keys function as tuning keys.
If CD or MD is selected as the input source,
these keys function as search keys.
P.CALL ( 4 ¢ ) keys (
If tuner is selected as the input source,
these keys function as P.CALL keys.
If CD or MD is selected as the input source,
these keys function as skip keys.