Kathrein DVB Cable Receiver UFC 662sw - Manual (Page 53)

53
SERVICE MENU
Select the “Service” menu using the

button, the

buttons in the main menu and

.
The following display appears:
Current software version
Last update run
Hardware version
Date of the channel list
FACTORY RESET
Select the “Service” menu using the

button, the

buttons in the main menu and

.
Use the

buttons to switch to “Factory Reset” and to call them up press the

button.
The following display appears:
You are now prompted to enter
the PIN code (factory default
setting: 0000). After entering the
PIN using the number pad you
are shown the following display:
Press the

button to load the factory settings. You will also be asked if you wish too delete the channel
list. Press the

button to delete the channel list, or press the button merely to reset to settings.
Following the factory reset the receiver then automatically starts the First Installation procedure.