Kathrein UFD 520 - Manual (Page 3)

Preface
Preface
Dear Customer,
The following operating manual will help you obtain the best optimal use from the
extensive features of your new satellite receiver.
We have written this operating manual as comprehensibly as possible and as con-
cise as necessary. A brief lexicon containing specialised terms not easily translat-
able has been appended at the end of this manual. To further assist you in your
search for a specific term, we have also added an index.
We have taken the environment into account with the mains switch. Therefore,
during longer pauses separate your receiver from the mains, in order to save en-
ergy. During short pauses, you should switch the receiver to standby with the re-
mote control, so the least amount of energy is used.
We wish you a great reception and much enjoyment with your new satellite re-
ceiver.
Your,
KATHREIN-Team
If you have any unexpected problems with your receiver, please contact your spe-
cialist supplier through our hotline.
Tel: (08031) 18 47 00
Fax: (08031) 18 46 76
Important Notes:
With regard to the programme allocation of the satellites and transponders,
changes always occur. In such cases, it is necessary to carry out new pro-
gramme settings, although factory pre-programming is always in accordance with
the respective, newest developments.
You can gather the details for the new setting from teletext on SAT 1, the internet,
or respective magazines. Refer to the section "Changing frequency" for more in-
formation.
Your receiver has been equipped with the newest respective Software at the fac-
tory. We are always trying to adjust the Software to the desires of our customers
and the state-of-the-art technology. Refer to section "Software and programme
lists update," for more information.
3