Kathrein UFD 520 - Manual (Page 47)

Video recorder connection
Video recorder connection
The connection diagram provided at the end of this User's Guide and the descrip-
tion of the video recorder will show you how you should connect your video re-
corder to the receiver.
Recording
In order to make a VCR recording, the satellite receiver must be switched on or the
timer must be pre-programmed (see section "Timer settings“).
Playback
For VCR playback, the satellite receiver must be set to "standby" so that the signal
route is switched through from the VCR/AUX SCART socket to the TV SCART
socket.
You must set the SCART socket of the Sat receiver to "VCR" with the
T
button
for your TV set to automatically play back the picture of the video recorder.
In this setting, the picture of the video recorder is switched through to the TV set
during playback.
If you set "SAT" by pressing the
T
button, the Sat receiver will have priority.
In the setting "TV," the video signal of the television set has priority.
47