Kenwood KRF-X9060D - Manual (Page 18)

18 EN
Setting up the system
PRE OUT connections
This receiver has additional preout jacks. These can be used for various purposes, but will need to be connected to an external power amplifier as shown
in the example below.
• Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker.
• To use the PRE OUT jacks, press only the SPEAKERS A key to the ON position.
• If you choose “6ch AMP SB”, sound will be heard from the PRE OUT Surround Back Left speaker (monoraul) only.
• This connection is available for listening in ROOM B.
ROOM B FRONT SURROUND SURROUND
BACK
SUB
WOOFER
CENTER
PRE OUT
R
L
Power amplifier
Center speaker
Power amplifier
Power amplifier
Power amplifier
Power amplifier
Subwoofer
Surround Back
speakers
Surround speakers
Front speakers
L R
L R
L R
•VR6070/10-22/EN 3/26/02, 6:51 PM 18