Kenwood KRF-X9060D - Manual (Page 19)

19 EN
Connecting the RF antenna and external IR Repeater
(For VR-6070 only)
The remote control for this receiver has the RF (radio frequency) and IR (infrared rays) transmission function. IR repeaters enables you to control
components located in cabinets or behind glass doors. You can enjoy a wider remote control signal range by placing the RF antenna and IR repeater away
from the receiver.
KENWOOD components (except DVD player): System control ¡
Other components: (Registering setup codes) IR REPEATER q
Setting up the system
M O N IT O R
RF REMOTE ANTENNA
IR
RECEIVER
IN
IR
REPEATER
OUT
RF antenna
Monitor TV
IR repeaters
(For RF Transmitter, select either
1. RF REMOTE Band 1, or
2. RF REMOTE Band 2)
Shape of plug to be connected.
IR RECEIVER IN
IR IN / OUT SPECIFICATION:
Terminal IR RECEIVER IR REPEATER
IN OUT
To Tip Signal Signal
To Ring Ground
To Sleeve + 8V Ground
Stereo mini plug Mono mini plug
Sleeve
Ring
Tip
Sleeve
Tip
IR REPEATER OUT
(For IR Transmitter, select
“RF REMOTE OFF” only )
IR RECEIVER
(IR-9991-sold
separately)
AC adapter
IR IN
To AC wall
outlet
IR OUT is free
Connecting IR repeater
1 Connect the IR repeater to the device as described in the
repeater’s manual.
2 Connect the IR repeater cable(s) to the IR REPEATER OUT
jack(s).
Notes
• IR repeaters send a signal similar to the device’s own remote control.
Xantech repeaters (models 282-00, 286-00, or 283-00) are compatible
with your new audio-video receiver.
Connecting the RF remote antenna
1 Insert the jack of the provided RF remote antenna into the
RF REMOTE ANTENNA jack.
2 Place the antenna wire vertically and fix it.
• Place the antenna away from the metallic panel.
•VR6070/10-22/EN 3/26/02, 2:29 PM 19