Kenwood KVT-920DVD - Manual (Page 22)

22
Touch Panel Adjustment Function
Select the area for TV broadcast viewing.
Selecting the Preset Bands
Touch [ TV 1 ] or [ TV 2 ]. The preset band
switches between TV1 and TV2.
Selecting the Reception Area
Touch [ G1 ] - [ G6 ] to select the channel setting
for your country as follows.
The reception area can be set for two separate
preset bands, TV1 and TV2.
NOTE
TV Area Setup Function
Adjusting the Touch Position
The touch panel can be adjusted if the position
touched and the operation performed do not
match.
Accurately touch the mark at the lower left.
Accurately touch the mark at the upper right.
When the mark at the upper right is touched,
the adjustment is completed and the system
setup menu screen reappears.
• If [ CANCEL ] is touched without touching the
button at the lower left, the adjustment is
cancelled and the screen that was set before
switching to the system setup menu reappears.
• If [ CANCEL ] is touched after touching the
button at the lower left, the button at the lower
left reappears.
• If [ RESET ] is touched, the settings are reset to
the factory defaults and the setup menu screen
reappears.
NOTE
2
1
A B
B
A
Touch Panel Adjustment Screen TV Area Setup Screen
Germany
Spain
Portugal
Netherlands
Belgium
Switzerland
Austria
Sweden
Norway
Denmark
Finland
Yugoslavia
Iceland
Italy
Albania
United Kingdom
Ireland
France
Russia
Poland
Hungary
Czech
Slovakia
Bulgaria
Roumania
Greece
PAL-B/G
PAL-I
SECAM-L
SECAM-D/K
SECAM-B/G
(G1)
(G2)
(G3)
(G4)
(G5)
(G6)