Kenwood KVT-920DVD - Manual (Page 27)

27
TV Control Function
Station Preset Memory
Store the channel of the station currently
being look to. You can then recall that station
with a single touch of a button.
Select the band/ station that you want to store.
Hold down preset station number [ P1 ] - [ P6 ]
on which you want to store the station, for two
seconds or more.
You can store 6 stations in each of the TV1 and
TV2 preset bands.
Auto Memory Entry
You can automatically store all the receivable
channels in the band currently being look to,
and then recall them with the touch of a
button later. This function is especially useful
when you are travelling and do not know what
stations are available. Up to 6 stations can be
stored this way.
Select the band for auto memory entry.
Touch [ AME ].
Touch [
4 ] or [ ¢ ] to start auto memory
entry.
The preset station numbers [ 1 ] - [ 6 ] are
shown in order.
When all the stations on a certain band have
been stored in the preset memory, the auto
memory entry stops. The tuner then plays the
last station received.
Recalling a Preset Station
Touch the preset station number [ 1 ] - [ 6 ] for the
desired station. The number of the recalled station
is displayed.
Switching to the TV List Screen
Touch [ LIST ] to switch to the TV list screen (see
p.28).
3
2
1
NOTE
2
1
Selecting the Preset Bands
Touch [ TV ] to select the TV preset band.
Each time you touch [ TV ], the preset band
switches between the TV1 and TV2.
Selecting the Video Inputs
Each time you touch [ VD ], the video input
switches between the video 1 and video 2.
No display for TV control icons when touch [ VD ].
Selecting the Seek Mode
You can choose from three seek modes: auto
seek, preset station seek, and manual seek.
Each time you touch [ SEEK ], the mode switches
as follows:
▼
AUTO 1: Auto Seek Tuning
▼
AUTO 2: Preset Station Seek Tuning
▼
MANU: Manual Tuning
Selecting the Channels
Auto Seek Mode (AUTO1)
• Touch [ ¢ ] to seek for channels up the band.
• Touch [
4 ] to seek for channels down the
band.
Preset station Seek Mode (AUTO2)
• Touch [
¢ ] to move to the next preset station.
• Touch [
4 ] to move to the last preset station .
Manual Seek Mode (MANU)
• Touch [ ¢ ] to increase the channel by one
step.
• Touch [ 4 ] to decrease the channel by one
step.
NOTE
D
A
G
Preset Band
Preset number
Channel number
AUTO 1/AUTO 2 /MANU indicator
SNPS
C B E
B
E
C
G
G
D
F
F
TV Area group
H
TV Control Screen
A