Changing the display, evf or lcd, Using the diopter dial, Checking camera and picture status – Kodak DX7590 User Manual
Page 14
Getting started
6
www.kodak.com/go/support
Changing the display, EVF or LCD
Your camera has an Electronic Viewfinder (EVF). The EVF, like the LCD (Liquid
Crystal Display) screen, displays what the camera captures.
Press the EVF/LCD toggle button to change
the screen from EVF to LCD, and back.
The selection remains until you press
the button again.
NOTE: The EVF/LCD screen turns off after 1 minute if no pictures are taken. Press any button to
turn the display back on.
Using the diopter dial
You can adjust the EVF sharpness for your eyesight.
■
Look through the EVF.
■
Turn the Diopter dial until the viewfinder
image is sharp.
Checking camera and picture status
The icons that appear on the EVF/LCD screen indicate the active camera and
picture settings.
Press the Status
button to turn the icons
off and on.
EVF/LCD
toggle
button
EVF
Diopter dial
Status
button