Troubleshooting, Camera problems, 7 troubleshooting – Kodak DX7590 User Manual

Page 62

Advertising
background image

54

www.kodak.com/go/support

7

Troubleshooting

When you have questions about your camera, start here. Additional technical
information is available in the ReadMe file located on the Kodak EasyShare
software CD. For updates to Troubleshooting information, see

www.kodak.com/go/dx7590support

.

Camera problems

If...

Try one or more of the following

Camera does not
turn on

Remove battery and verify that it’s the correct type, then
reinsert it.

Insert a charged battery.

Place the camera on a Kodak EasyShare camera or printer
dock (sold separately), then try again.

Connect the camera to a Kodak 5-volt AC adapter (sold
separately), then try again. See

page 2

for more battery

information.

Camera does not
turn off and the lens
does not retract

Camera buttons and
controls do not
function

Lens does not extend
when camera turns
on or does not retract

Confirm that the battery in camera is charged.

Turn camera on and off again.

If problem still exists, get help (see

page 59

).

EVF/LCD screen is
black or does not
turn on

Remove the lens cap.

Push the EVF/LCD toggle button to change display.

In Review, a blue or
black screen is
displayed instead of
a picture

Transfer the picture to the computer.

Transfer all pictures to the computer (see

page 51

).

Take another picture. If problem still continues try internal
memory and/or another memory card.

Pictures remaining
number does not
decrease after taking
a picture

Continue taking pictures. The camera is operating normally.

(The camera estimates the number of pictures remaining after
each picture is taken, based on picture size and content.)

Picture orientation is
not accurate

Set the Orientation Sensor to ON (

page 31

).

Advertising