Kohler Touchless bathroom Sink Faucet K-13469 - Manual (Page 6)

Remove the Vandal-Resistant Plug
NOTE: Disassemble the faucet following the steps in the
″Disassemble/Reassemble the Faucet″ section.
From inside the faucet body, use a screwdriver to pop out the
vandal-resistant plug button.
If you are adjusting the temperature, go to the
″Optional
Temperature Limiting Adjustment
″ section and follow the
instructions.
If you are installing the handle assembly, refer to the illustration
in the
″Optional Temperature Limiting Adjustment″ section.
Otherwise, reinstall the plug button.
Position the plug button and firmly press into place.
Vandal-Resistant
Plug Button
1124215-5-C 6 Kohler Co.