Kenwood KRC-859C - Manual (Page 28)

— 28 —
English
Disc control features
(See page 7)
Disc Name Preset Play (DNPP)
If you have preset the name of a disc that you want to listen
to in the disc changer, you can look for it by name and start
playing it.
Press the DNPP button on the remote control.
"DNP PLAY" will appear in the display, and the disc name
preset play mode is entered.
The preset names/disc titles of the disc in the disc changer to
which you are currently listening are successively displayed for
five seconds each.
In any of the units that are connected, discs that have not been
disc name preset will display "NO NAME".
• This function can only be used in disc changers that were
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
• Discs in the disc changer that have never been played before
will appear as "NO ACCESS" when the disc names are
displayed. When you cannot identify a disc because of the "NO
ACCESS" display after inserting a disc magazine, try playing it
using the disc scan or a similar function to display the disc
name. Also note that "NO DISC" will be displayed when a disc
has not been loaded.
Rapid display (forward / reverse):
Press the DISC
+
or DISC
–
button.
Pressing the DISC
+
button will rapidly display the preset
names/disc titles in order.
Pressing the DISC
–
button will rapidly display the preset
names/disc titles in reverse order.
When the name appears for the disc you want to play
Press the OK button.
The disc whose name is displayed will be recalled, and the disc
name preset play (DNPP) mode will end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode will be cancelled.
2
NOTE
1
Function of Remote control with DNPP button (See page 8)