English – Kenwood KRC-859C User Manual

Page 44

Advertising
background image

— 44 —

English

SOLUTION

POSSIBLE CAUSE

PROBLEM

The memory is erased when
the ignition is turned off.

The battery cable has not been connected to the proper
terminal.

Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".

The TEL mute function does
not work.

The TEL mute cable is not connected properly.

Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".

The TEL mute function turns on
even though the TEL mute
cable is not connected.

The TEL mute cable is touching a metal part of the car.

Pull the TEL mute cable away from the metal part of the car.

The faceplate does not open or
close.

The ambient temperature is too low.

Warm up your car.

Troubleshooting Guide

The ignition and battery cable are incorrectly connected.

Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".

Disc control mode

SOLUTION

POSSIBLE CAUSE

PROBLEM

The computer chip in the unit is not functioning normally.

Press the reset button on the unit (see page 4).

The disc control mode cannot
be selected.

No cable has been connected to the disc changer input
terminal on the unit.

Connect the cable to the disc changer input terminal on the
unit.

The specified disc does not
play, but another one plays
instead.

The specified CD is very dirty.

Clean the CD.

The CD is upside-down.

Load the CD with the labelled side up.

The disc is loaded in a different slot from that specified.

Eject the disc magazine and check the number for the
specified disc.

The disc is severely scratched.

Try another disc instead.

The sound skips.

Something is touching the disc changer.

Remove whatever is touching it.

The CD is scratched or dirty.

If skipping happens at the same place when the car is
stopped, something is wrong with the CD. Clean the CD.

The display shows that the
changer is being played, but no
sound can be heard.

The specified track does not
play.

Random play or magazine random play has been selected.

Turn off the random play or magazine random play function.

Advertising
This manual is related to the following products: