Kenwood KRC-859C - Manual (Page 21)

— 21 —
Turning Blank Skip Function On/Off:
Press the B.S button to switch the blank skip function on and
off.
• If the blank space contains much noise, the blank skip function
may not work right.
• Sections recorded at low levels may trigger the blank skip
function if they last for 10 seconds or more.
NOTE
Tuner Call Function
Switch automatically to the tuner whilst you are rewinding or
fast forwarding the tape.
Turning Tuner Call Function On/Off:
Press the T.C button to switch the tuner call function on and
off.
Tape Advance Function
Rewinds to the beginning of the current track (or fast
forwards to the beginning of the next track), continuing tape
playback.
Rewinding tape to the beginning of current track:
Press the 4 button, and the tape will rewind to the beginning
of the current track and automatically start playing again.
To advance to the beginning of the next track:
Press the ¢ button, and the tape will advance to the
beginning of the new track and automatically start playing
again.
The tape advance function "knows" where a track begins by
detecting the blank space preceding it (i.e., the space between
tracks). However, when the blank space lasts for less than 4
seconds or contains noise, this function may not operate
correctly. Furthermore, sections recorded at low levels may
trigger the function if they last for 4 seconds or more.
NOTE
Music Repeat Function
Repeatedly plays the current track.
Turning Music Repeat Function On/Off:
Press the REP button to switch the music repeat function on
and off.
Cancelling Music Repeat Function:
Press either the REP or 38 button.
The music repeat function "knows" where a track begins by
detecting the blank space preceding it (i.e., the space between
tracks). However, when the blank space lasts for less than 4
seconds or contains noise, this function may not operate
correctly. Furthermore, sections recorded at low levels may
trigger the function if they last for 4 seconds or more.
NOTE
Switching Display for Tape
Switching the Display:
• When the Switching Clock display function is OFF, and for
KRC-PS959R:
Each time you press the DISP button, the running display
switches on or off.
• When the Switching Clock display function is ON:
Each time you press the DISP button, the display switches
between the mode display and clock.
• When the switching clock display (P.32) is set to off, the display
will not switch to the clock display.
• The £ indicator lights whilst the clock is displayed.
NOTE