All modes, Tuner mode, Tape mode – Kenwood KRC-859C User Manual

Page 35: Disc control mode, Basic operations of steering remote control

Advertising
background image

— 35 —

Basic operations of steering remote control

(See page 8)

Optional for KRC-759R

To prevent accidents, do not attempt to use the steering remote
control whilst turning the steering wheel.

Replacing the Lithium Battery:

Use one lithium battery (CR2025).
Insert the battery with the

+

and

poles aligned properly, following the
illustration.

Store unused lithium batteries out of the reach of children. Contact
a doctor immediately if the battery is accidentally swallowed.

2WARNING

2WARNING

All Modes

SRC button

Each time you press the SRC button, the mode switches as
follows:

Tuner mode

Tape mode

Disc control mode

The mode switches to the next mode from any mode which
cannot be used.

The disc control mode will differ depending on the unit that is
connected.

VOLUME buttons

Press the

5 button to turn the volume up.

Press the

∞ button to turn the volume down.

ATT button

Turns down the volume quickly. To return the volume to its
original level, press the button again. Turning down the volume
all the way also cancels attenuation.

NOTE

Tuner Mode

TUNE buttons

Press the

4 button to make decreasing seeks (using the

preset tuning mode).
Press the

¢ button to make increasing seeks (using the preset

tuning mode).

FM button

Selects and switches between the FM1, FM2 and FM3 bands.

AM button

Selects the MW and LW bands.

Tape Mode

4

/

¢

buttons

Press the

4 button once for each track (including the current

track) you want to skip backwards.
Press the

¢ button once for each track you want to skip

forwards.

AM/DISC

/ FM/DISC

+

buttons

Press the AM/DISC

button to rewind the tape.

Press the FM/DISC

+

button to fast forward the tape.

Disc control Mode

DISC buttons (for disc changers)

Press the AM/DISC

button to search through the discs

backwards.
Press the FM/DISC

+

button to search through the discs

forwards.

TRACK buttons

Press the

4 button to search through the tracks backwards.

Press the

¢ button to search through the tracks forwards.

Advertising
This manual is related to the following products: