Kyocera Phantom TXLCC10042B - Manual (Page 46)

38 Using Voice Recognition
Using voice features with
hands-free car kits
You can use voice commands to make a phone call
or to answer the phone only if your phone is
connected to a professionally installed Kyocera
hands-free car kit (sold separately).
Note: The following features apply only to
professionally installed hands-free car kits
unless noted.
To shop for hands-free car kits, visit
www.kyocera-wireless.com/store , or call
800-349-4188 (U.S.A. only) or
858-882-1410.
Waking up the phone
If your phone is connected to a professionally
installed Kyocera hands-free car kit, you can use a
voice command to activate the phone to make a
phone call.
Note: Voice Wake-up does not work with
Keyguard active.
To activate the Voice Wake-up setting:
1. Select Menu
→
Settings
→
Voice Services
→
Voice Wake-Up
→
With ext. pwr .
2. Select Menu
→
Settings
→
Keyguard
→
Disabled , then press .
To wake up the phone:
1. Say “ Wake Up ” and listen for a tone.
2. Say “ Wake Up ” again until you hear two tones.
If the phone does not recognize your “Wake up”
command, see “Training voice recognition” on
page 39.
Answering the phone
You can set the hands-free car kit to either
(1) answer automatically or (2) ring until you
answer using a voice command.
Answering automatically
To set your phone to answer automatically:
• Select
Menu
→
Settings
→
Accessories
→
Auto-Answer
→
After 5 secs .
Note: This setting also works wih the portable
hands-free car kit.
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
Kyocera hands-free car kit.
To turn off Auto-Answer:
• Select
Menu
→
Settings
→
Accessories
→
Auto-Answer
→
Disabled .