Kingston Technology DATATRAVELER 4808071-001.A01 - Manual (Page 5)

Document No: 4808071-001.A01 DataTraveler ® Locker+ 5
4. Accept the License Agreement to continue.
5. Set a device password for data protection (Figure 3). This password will enable the drive
to be used as removable storage. It will also protect the data stored on the drive.
6. Re-enter the password for confirmation.
Figure 3: Complex Password
7. Click Next to set your DTLocker+ password.
The password must be a
minimum of 6 characters and
must not exceed 16
characters. It must also
contain three of the following
four characters: lower case
letters, upper case letters,
numeric characters and/or
special characters.
Two examples of a valid
complex password: ABc123
and bob$411.