Kingston Technology DATATRAVELER 4808071-001.A01 - Manual (Page 9)

Document No: 4808071-001.A01 DataTraveler ® Locker+ 9
•
Format DTLocker+ – This option is used to format your DataTraveler Locker+
drive (Figure 9).
Figure 9: Format - DTLocker+
• Online Support – Takes you directly to Kingston’s on-line technical support.
• About DTLocker+ – Used to obtain important information such as: DTLocker+ Version,
Firmware Version, and Serial Number.
• Shut down DTLocker+ – Will stop the DTLocker+ drive for safe removal. Once you
receive the confirmation you can safely remove the DTLocker+ from the USB port .
All data in the read/ write
partition will be lost!
The DTLocker+ password is
required in Windows XP/2000
(non admin users) and
Windows 7 and Vista (all
users) to format the drive.
DTLocker+ includes a
“lockdown” for enhanced
security. This lockdown will
lock the DTLocker+ whenever
a maximum number of
unsuccessful password
attempts exceed a pre-
configured value (see section
3.4 Secure Storage for
details).
Internet service is required for
the Online Support feature.