Kingston Technology DATATRAVELER 4808071-001.A01 - Manual (Page 7)

Document No: 4808071-001.A01 DataTraveler ® Locker+ 7
3 U
SING
DTL
OCKER
+ (W
INDOWS
)
3.1 Login to DTLocker+
1. After the initial Setup is complete, you will automatically be logged into DTLocker+.
Hereafter, you will login to DTLocker+ promptly after inserting the drive into the USB
port. If you were not automatically logged in by the initial setup, enter your password to
access the data stored on the DTLocker+ drive (Figure 6).
Figure 6: DTLocker+ Login
3.2 Browsing the DTLocker+
1. The DTLocker+ is broken down into two (2) partitions (Figure 7).
• DTLplus is a read-only partition containing the DTLocker+ system files.
• KINGSTON (or Removable Disk) is the read/write partition for data storage, protected by
the complex password.
Figure 7: DTLocker+ Partitions
Windows 7 Non Admin User -
The data partition may not
mount until after DTLocker+
login.