Kenwood R-K711 - Manual (Page 46)

D.AUDIO
Adjusting the Digital Audio Player Input Level
Press the [D.AUDIO E] key. 1 1
3 3
Select “INPUT LEVEL“.
Press the [ G] or [H] key.
4 4 Set the input level.
Press the [ G] or [H] key.
Use the procedure below to adjust the input level for the external
component connected to the [D.AUDIO IN] terminal.
Use this adjustment when the volume from an external component is
noticeably higher or lower than other input sources at the same volume
setting.
You can adjust the input level in a range from –3
to +5. z
Press the [ENTER] key.
D.AUDIO
If you adjust the input level for D.AUDIO, the output level from the [TAPE REC
OUT] terminal will also change. z
Press the [MODE] key. 2 2
Press the [ENTER] key.
R-K711 46