Kyocera E4000 - Manual (Page 28)

Calling 28
•
Digit Dial/Redial/Callback
: say the
number to dial.
Listening to voicemail
Press and hold .
Setting connection alert
You can set the phone to ring, vibrate, or
flash the backlighting when the
recipient of a call has answered.
To setup connection alert, go to
Start
>
Settings
>
Phone
>
Connection Alert
.
Answering a call
Press or (
Answer
) to answer
a call.
Rejecting a call
Press or (
Ignore
) to reject an
incoming call.
Muting a call
Press or to mute an incoming
call.
Ending a call
When you are finished with your phone
call, press
to end the call.
Adjusting the volume
During a call, press / to adjust the
volume.
Making a conference call
* Network support dependent.
You can create a three-way conference
call between yourself and two or more
parties. Call up multiple parties one by
one and link them together in a
multiparty call.
1. Make a call to the first person.
2. While the first call is active, press
(
Menu
) and select
Hold
. The
active call is put on hold.
3. Dial a second number to call the
second person.
4. While the second call is active, press
(
Menu
) and select
Conference
to engage in a three-way conference
with the first and second parties.
5. If you want to speak to more people,
repeat step 2 to step 4.
Select
Menu
>
Help
for usages and
examples.
You will be asked to set the voicemail
number if it is not stored on your SIM
card.
Warning!
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing
from loud ringtones.
Additional information
To answer the call by pressing any key, go
to
Start
>
Settings
>
Phone
>
Call
Options
, and check
Any key answer
.