Kyocera KM-P4845w - Manual (Page 42)

CHAPTER 5 MANAGEMENT AND SETTING
5-8
6. Timer set
NOTE
• If “5. Auto shutoff” is set to “OFF”, the auto shutoff timer cannot be
set.
• When setting the auto energy saver time, do not set a longer time
than the auto shutoff time. When the auto energy saver time
exceeds the auto shutoff time, the auto shutoff function will engage
without the auto energy saver function having operated.
1 Press the N or M key to select the function for which the
timer is to be set.
Inch specifications
Timer set:
1.Auto pre heat
Metric specifications
Timer set:
1.Auto preheat
2 Press the Enter key.
3 Press the N or M key to set the time that elapses before the
selected function is activated.
> If “1. Auto preheat” has been selected, set the time to from
5 minutes to 45 minutes.
Inch specifications
Auto preheat:
15min.*
Metric specifications
Auto preheat:
15min.*
> If “2. Auto shutoff” has been selected, set the time to from
15 minutes to 120 minutes.
Inch specifications
Auto Shutoff:
90min.*
Metric specifications
Auto Shutoff:
90min.*
4 Press the Enter key. The display will show “set ( value ) *” and
return to the step 1 screen.
5 Press the N or M key to select “End” [“back”].
6 Press the Enter key. The printer will return to the machine
settings screen.