Kyocera KM-P4845w - Manual (Page 44)

CHAPTER 5 MANAGEMENT AND SETTING
5-10
10. Buzzer
1 The selected item will flash. To enable the buzzer press the
N or M key to select “ON”.
Inch specifications
Buzzer:
ON*
Metric specifications
Buzzer:
ON*
2 Press the Enter key. The display will show “set ( value ) *” and
return to machine settings screen.
11. Mgr. code change
1 The arrows will flash. Use the MNOP cursor keys to input
the pin code
Inch specifications
Mgr.code change:
q Q r R *
Metric specifications
Mgr.code change:
q Q r R *
2 Press the Enter key. The display will show “set ( value ) *” and
return to machine settings screen.