Kicker LIVIN LOUID SS65.2 - Manual (Page 18)

18
SS Component Systems
Installa
tion
Wiring
There are three sets of high quality 16 Gauge speaker wire supplied with the Kicker
SS Component Systems. The longest set of wires is for connecting your
amplifier or source unit to the crossover network. One of the shorter pairs is to
connect the midrange output of the crossover to the spring loaded binding posts on the
Midrange Driver. The last set connects the tweeter output of the crossover to the short
wire coming out of the tweeter; join using the supplied Butt Connectors.
If you wish to use your own wire or need to lengthen the wire to fit your needs, we
recommend using at least 16 gauge wire.
Use the supplied Allen Wrench to loosen and tighten the connections at the crossover.
Crossover
SSXX.2
SSXX.2
INPUT MID TWEETER
_
+
_
+
_
+
Midrange
Amplifier
+ -
Tweeter
+ -