Kicker LIVIN LOUID SS65.2 - Manual (Page 8)

8
SS Component Systems
Installa
tion
SEPARATES WITHOUT GRILL
Prepare The Midrange
You will need to have the Phase Plug
mounted in the Midrange. Remove any
posts in the Midrange and get a Phase
Plug from the kit.
Insert Phase Plug
into the Midrange
and rotate clock-wise
to tighten.
You should now
have a Midrange
Driver that looks like
this.
Repeat this
process for the
second Midrange.
The Midrange is now ready to mount
under the factory panel or any other panel
you are using.
Prepare The Tweeter
You will need to have the Tweeter
mounted to the Black Tweeter Flush Mount
Ring. Get a tweeter and the ring from the
kit.
Insert the
Tweeter into the
Flush Mount Ring
and rotate clock-
wise to tighten.
You should now
have a Tweeter
assembly that looks
like this.
Repeat this
process for the
second Tweeter.
The Tweeter is now ready to mount in
the factory panel or any other panel you
are using.