Warranty, Troubleshooting, Limited one year warranty – Keurig B70 User Manual

Page 9

Advertising
background image

SECTION 5

Warranty

Limited One Year Warranty

Keurig, Incorporated warrants that your Brewer will be free of defects in

materials or workmanship

under normal home

use for one year from the date

of purchase. It is recommended that you fill out and return the warranty card

enclosed with your Brewer so that your purchase information will be stored

in our system. Keurig will, at its option, repair or replace a defective Brewer

without charge upon its receipt of proof of the date of purchase. If a

replacement Brewer is necessary to service this warranty, the replacement

Brewer may be new or reconditioned. If a replacement Brewer is sent, a new

limited one year warranty will be applied to the replacement Brewer.

This warranty only applies to Brewers operated in the United States and

Canada. This warranty gives you specific legal rights, and you may also have

other rights that vary from state to state and, in the case of Canada, from

province to province.
Only the use of Keurig Brewed

®

K-Cup

®

brand packs and accessories will

guarantee the proper functioning and lifetime of your Keurig

®

Brewer. Any

damage to or malfunction of your Brewer resulting from the use of non

Keurig Brewed

®

K-Cup

®

brand packs and accessories may not be covered by

this warranty or may result in a service fee if the damage or malfunction is

determined to be caused by such use.

What is not covered by the Limited Warranty?

THIS WARRANTY DOES NOT COVER CONSEQUENTIAL OR INCIDENTAL

DAMAGES SUCH AS PROPERTY DAMAGE AND DOES NOT COVER

INCIDENTAL COSTS AND EXPENSES RESULTING FROM ANY BREACH

OF THIS WARRANTY, EVEN IF FORESEEABLE. Some states or provinces

do not allow the exclusion or limitations of incidental or consequential

damages, so the above limitation or exclusion may not apply to you

depending on the state or province of purchase.

Nor does this warranty cover damages caused by use of non Keurig Brewed

®

K-Cup

®

brand packs or accessories, services performed by anyone other

than Keurig or its authorized service providers, use of parts other than

genuine Keurig parts, or external causes such as abuse, misuse,

inappropriate power supply or acts of God.

Other Limitations

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS

WARRANTY, WHETHER WRITTEN OR ORAL. IN ADDITION, KEURIG HEREBY

SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO

YOUR B70 BREWER, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Some

states or provinces do not allow disclaimers of such implied warranties or

limitations on how long an implied warranty lasts, so the above limitation

may not apply to you depending on the state or the province of purchase.

How do you obtain warranty service?

Keurig

®

Brewers are high-quality appliances and, with proper care, are

intended to provide years of satisfying performance. However, should the

need arise for warranty servicing, simply call Keurig Customer Service at

our toll free phone number 1.866.901.BREW (2739). Please do not return your

Brewer for servicing without first speaking to Keurig Customer Service to

obtain an Authorization to Return number (ATR). Keurig

®

Brewers returned

without an ATR number will be returned to the sender without servicing.
Keurig, Incorporated

55 Walkers Brook Drive

Reading, MA 01867

1.866.901.BREW (2739)

17

SECTION 4

Troubleshooting

16

SITUATION

Brewer does not

have power

Brewer will

not brew

LCD Control Center

indicates “PRIME”

and the blue light in

the Water Reservoir

is flashing

SOLUTION

Plug Brewer into an independent outlet.

Check to be sure that it is plugged in securely.

Plug into a different outlet.

Reset your home’s circuit breaker, if necessary.

Make sure that the Power Switch has been turned

on and LCD lights are illuminated.

After placing the K-Cup

®

pack in the K-Cup

®

Pack

Holder, make sure the Handle is pushed down securely

and the LCD Control Center indicates “READY TO

BREW” with the Left, Right and BREW Buttons flashing,

then press the Left, Right or BREW Button.

If the LCD Control Center indicates “ADD WATER,”

add water to the Water Reservoir or make sure the

Water Reservoir is seated properly in its base.

If the LCD Control Center indicates “ADD WATER”

even after refilling, contact Customer Service at

1.866.901.BREW (2739).

The Exit Needle may be clogged (refer to page 14).

If the LCD Control Center indicates “PRIME” and the

blue light in the Water Reservoir is flashing, see below.

Completely remove the Water Reservoir and

thoroughly clean (refer to page 14). Ensure the

Water Reservoir is fully filled with water. Return it

to the Brewer and ensure it is seated properly

(refer to page 6).

If you have completed the above procedure two

times and this situation persists, contact Customer

Service at 1.866.901.BREW (2739).

SITUATION

Brewing a

partial cup

The time is not

displayed on the

LCD Control

Center

Brewer shuts

off or turns on

automatically

The blue light in

Water Reservoir is

flashing

SOLUTION

The Exit Needle may be clogged (refer to page 14).

Clean the K-Cup

®

Pack Holder Assembly if necessary

and rinse under faucet (refer to page 13).

The Water Reservoir may have been removed during

brewing. Replace the Water Reservoir and perform a

cleansing brew without a K-Cup

®

pack.

De-scale the Brewer (refer to page 14).

If you have repeated the de-scale procedure on your

Brewer two times and it is still only brewing

a partial cup, contact Customer Service at

1.866.901.BREW (2739).

The time will not be displayed on the LCD Control

Center unless you have set it. To set the clock, follow

the procedure on page 10.

If power is interrupted to the Brewer, you will need

to set the clock again using the procedure on page 10.

Check to make sure that the Auto Off timer

and/or On/Off time features have not been set.

To do this, press the MENU Button and scroll

through the programming options. “OFF” should

be indicated for Auto Off timer and On/Off. If “OFF”

is not indicated, follow directions on page 10 to reset.

The water level is low and a full cup cannot be

brewed. Add water to Water Reservoir.

If the LCD Control Center indicates “PRIME,” please

see situation to the left (LCD Control Center

indicates “PRIME” and the blue light in the Water

Reservoir is flashing).

If any problems persist, contact Customer Service at 1.866.901.BREW (2739)

Advertising