Kohler Touchless Urinal K4915 - Manual (Page 10)

Troubleshooting (cont.)
Symptoms Probable Causes Recommended Action
D. The filter is dirty. D. Clean the filter.
Refer to the ″Clean
the Filter
″ section of
this guide.
3. The lamp on
the battery
indicator is
flashing, but no
water is
present when
user or object
is detected.
A. Batteries are
exhausted.
A. Replace the
batteries with 4
alkaline AA
batteries. Refer to
the ″Replace the
Batteries
″ section of
this guide.
4. The lamp on
the battery
indicator does
not flash and
the water
keeps flowing.
A. The valve is
clogged.
A. Clean the filter.
Refer to the ″Clean
the Filter ″ section of
this guide. Once the
filter is clean,
activate the unit to
flush several times.
If the filter clogs
again, turn off the
supply stop, then
flush the water
supply line to
remove debris.
085788-5-D 10 Kohler Co.