Kohler Touchless Urinal K4915 - Manual (Page 6)

Operation Settings
Default Setting
Switch Position First Flush
Duration in
Seconds
1 OFF No 0
2 OFF 1-3
3 OFF
9
4 ON
Change the Default Setting
Lift the control unit out from the tank.
Remove and retain the plug cover on the control unit to reveal
the switch unit.
Note the ON ↑ stamp on the switch unit.
Using the tip of a pin, set each switch to the desired settings.
Refer to the tables below for switch position.
Reinstall the plug cover.
Place the control unit back into the tank.
First Flush — Switch 1
Position First Flush Duration in Seconds
OFF No 0
ON Yes 3
ON
Switch Unit Plug Cover
Control Unit
085788-5-D 6 Kohler Co.